The HotFrost V115 PUF purifier will help turn tap water into drinking water using 4 stages of purification. And the heating and cooling functions, like those of a traditional water cooler, will make everyday life simpler and cozier.
The first stage of purification is provided by a sediment filter, removing sand, rust, and other impurities; the second stage is provided by a carbon filter, removing free chlorine, odors, and organic compounds from the water; the third stage is provided by a carbon post-filter, eliminating any possible off-tastes and improving the water's flavor; the fourth stage of purification occurs with the help of an ultrafiltration membrane, removing bacteria, viruses, and ultrafine particles of contaminants.
Timely replacement of filters will always ensure you have clean water on hand for making hot and cold beverages, as well as soups and sauces.
Using the purifier implies connection to the water supply. Typically, the distance between the purifier and the water connection point (without loss of performance) can reach up to 100 meters, but this distance can be increased. In this case, it is necessary to consider the water pressure in the plumbing, and if the pressure is low, install a pump to increase it.
The purifier is equipped with leak protection. A water leakage detection sensor (board) is placed at the bottom of the purifier housing. If a leak occurs and the sensor electrodes are submerged in water for 10 seconds, a signal is sent to the main control board, triggering the electromagnetic valve to shut off the water supply to the system. Flashing leak detection indicators will notify you of the activated protection.
The design of the HotFrost V115 PUF purifier mirrors that of the most popular water coolers. The combination of anthracite with a democratic white color makes it versatile for use in almost any interior and helps accentuate the expressiveness of the room's design.
info@hot-frost.com
By submitting this form, you agree to our 
