Purifier HotFrost V115PUF (no filters)

Product Description

The HotFrost V115 PUF purifier will help turn tap water into drinking water using 4 stages of purification. And the heating and cooling functions, like those of a traditional water cooler, will make everyday life simpler and cozier.

The first stage of purification is provided by a sediment filter, removing sand, rust, and other impurities; the second stage is provided by a carbon filter, removing free chlorine, odors, and organic compounds from the water; the third stage is provided by a carbon post-filter, eliminating any possible off-tastes and improving the water's flavor; the fourth stage of purification occurs with the help of an ultrafiltration membrane, removing bacteria, viruses, and ultrafine particles of contaminants.

Timely replacement of filters will always ensure you have clean water on hand for making hot and cold beverages, as well as soups and sauces.

Show more

Attention! This modification is supplied without installed filters (cartridges). Filters need to be purchased separately.

Using the purifier implies connection to the water supply. Typically, the distance between the purifier and the water connection point (without loss of performance) can reach up to 100 meters, but this distance can be increased. In this case, it is necessary to consider the water pressure in the plumbing, and if the pressure is low, install a pump to increase it.

The purifier is equipped with leak protection. A water leakage detection sensor (board) is placed at the bottom of the purifier housing. If a leak occurs and the sensor electrodes are submerged in water for 10 seconds, a signal is sent to the main control board, triggering the electromagnetic valve to shut off the water supply to the system. Flashing leak detection indicators will notify you of the activated protection.

The design of the HotFrost V115 PUF purifier mirrors that of the most popular water coolers. The combination of anthracite with a democratic white color makes it versatile for use in almost any interior and helps accentuate the expressiveness of the room's design.

Show less

Photo / Video

Characteristics

Water Temperature Options
hot - cold
Water Temperature Options
Usually, water dispensers allow users to fill a container with both hot and cold water. However, some models, in addition to hot and cold water, also provide room-temperature* water. *Room temperature water will only remain at room temperature if it is dispensed regularly (i.e., if users frequently drink this type of water). Otherwise, in dispensers with compressor cooling, this water may become slightly cool, while in models with thermoelectric cooling, it may become slightly warm. This feature is due to the internal arrangement of the cooling and heating elements in the dispenser. In some models without a cooling function, only hot and room-temperature water is available.
Color
white
Child Lock
no
Type of Сooling
compressor
Type of Сooling
Water dispensers with compressor cooling (similar to a household refrigerator) are more powerful and can cool water to below 10°C. Thermoelectric cooling uses a thermoelectric module based on the Peltier effect. Thermoelectric systems are less powerful than compressor systems. The cold water temperature is typically 12–15°C below room temperature.
Heating Capacity
5.5 l/h (≤ 90°C)
Cooling Capacity
2.0 l/h (≤ 10°C)
Heating Power
650 w
Cooling Power
90 w
Adjustable Temperature
no
Weight (net)
15.70 kg
Show more
Weight (gross)
17.80 kg
Installation Type
freestanding
Installation Type
Tabletop models are compact and designed to be placed on a desk, cabinet, kitchen countertop, or other elevated surfaces. Freestanding models are larger units designed to be placed directly on the floor.
Size W*H*L (mm)
310*1040*360
Packing size W*H*L (mm)
358*1120*386
Material of hot water tank
stainless steel
Material of cold water tank
stainless steel
Hot water tank volume
1.00 l
Сold water tank volume
3.60 l
Heating element type
internal tube
Heating / Cooling indicator
yes
Cup dispenser storage
no
Country of origin
China
Normal temperature
no
LED backlighting
no
Tap type
mechanical
Taps quantity
2
Water dispensed by
press-with-cup type tap
Taps height (mm)
795
Taps height (mm)
The level of tap allocation is the distance between floor and drain hole of water tap. Quite often this indicator enables to estimate definitely convenience of water collection in the cup or other reservoir.
Removable drip tray
yes
Power-saving mode
no
Operating temperatures
from + 18°C to + 38°C
Warranty
24 m.
Power cord lenght (m)
1.85
Energy efficiency class for cooling
A
Energy efficiency class for heating
B
Purification capacity
2 l/min.
Compressor warranty
5 years
Show less
Popular sections:
Where to Buy Instructions Warranty About Us
Contact Us
*
*
Send message
By submitting this form, you agree to our Privacy Policy
© All rights reserved, 2003–2026
By continuing to browse this website or by clicking any link or button, you consent to the use of cookies and similar technologies, including Google Analytics. More information about how we process and protect your personal data can be found in our Privacy Policy.
Accept