Purifier HotFrost V450PUFSM.
1. Sanitization of the purifier.
The purifier is equipped with an ultraviolet treatment system for the tank where filtered water accumulates. The sanitization of the purifier's clean water tank occurs automatically without human intervention. A quartz bactericidal LED emitting ultraviolet radiation (peak wavelength of 275 nanometers) automatically turns on when the purifier is connected to the power grid, illuminates for 40 minutes, and then turns off for 140 minutes. It then turns on again for 40 minutes and continues working according to the described cycle.
Thus, bacteria that may be present in the water for any reason are destroyed by ultraviolet light.
2. Multi-stage purification of tap water.
The HotFrost V450 PUFSM purifier will help turn tap water into drinking water using 4 stages of purification. And the heating and cooling functions, like those of a traditional water cooler, will make everyday life simpler and cozier.
The first stage of purification is provided by a sediment filter, removing sand, rust, and other impurities; the second stage is provided by a carbon filter, removing free chlorine, odors, and organic compounds from the water; the third stage is provided by a carbon post-filter, eliminating any possible off-tastes and improving the water's flavor; the fourth stage of purification occurs with the help of an ultrafiltration membrane, removing bacteria, viruses, and ultrafine particles of contaminants.
Filters are included in the device package.
3. Modern ergonomics and design of the purifier.
The control panel of the purifier functions is made of high-quality acrylic with a stainless steel texture. The angle of inclination of the panel is convenient for both visual inspection of the control elements and contact with them.
In this model of the purifier, mechanical water dispensing buttons are a thing of the past. The purifier is operated through touch-sensitive (electronic) buttons with corresponding color indication, making it easier to understand which function in the purifier is activated.
The purifier has child lock protection for hot water dispensing. It is worth noting the modern implementation of this function, not just through mechanical blocking, but through a programmed 3-second delay in pressing the hot water dispensing unlock button.
Since the purifier's filters require periodic replacement, there is a filter life indicator on the control panel for visual monitoring of their replacement schedules.
4. Leak protection.
The purifier is equipped with leak protection. A water leakage detection sensor (board) is placed at the bottom of the purifier's housing. If a leak occurs and the sensor electrodes are submerged in water for 10 seconds, a signal is sent to the main control board, triggering the electromagnetic valve to shut off the water supply to the system. Flashing leak detection indicators will notify you of the activated protection.
5. Distance of the purifier from the connection point.
Using the purifier implies connection to the water supply. Typically, the distance between the purifier and the water connection point (without loss of performance) can reach up to 100 meters. But this distance can be increased. In this case, it is necessary to consider the water pressure in the plumbing, and if the pressure is low, install a pump to increase it.
6. Water dispensing speed.
0.5 liters of water - in 14 seconds.
info@hot-frost.com
By submitting this form, you agree to our 
