Purifier HotFrost V80PUFMT

Design and functionality - at the forefront. This model will attract attention with an electronic display, an elegant front panel made of tempered glass, complement any modern interior, and make your life pleasant and comfortable. The ergonomic height of the device - 1.4 meters will allow you to comfortably pour water and control the device.

In addition to the 4-stage purification system of filters, water undergoes additional processing "Clean Tank" - a UV lamp is built into the tank of purified water, preventing the development of bacteria in the water.

Purifier HotFrost V80PUFMT is fully controlled by a touch panel, all information about the operation of the device is displayed on the electronic display - heating, cooling, filtration, filter resource, UV lamp activation.

1. Sanitation (disinfection) of the purifier.

The purifier has a system of ultraviolet treatment of the tank (tank), where the water purified by the filters accumulates. Sanitation of the clean water tank of the purifier occurs automatically without human intervention. The quartz bactericidal LED of the ultraviolet spectrum of radiation (peak wavelength 275 nanometers) automatically turns on when the purifier is connected to the power supply, lights up for 40 minutes and then turns off for 140 minutes. Then it turns on again for 40 minutes and continues to work in the cycle described above.

Thus, bacteria that could somehow end up in the water are destroyed by ultraviolet light.

2. Multi-stage purification of tap water.

Purifier HotFrost V80PUFMT will help to turn tap water into drinking water with 4 stages of purification. And the functions of heating and cooling, as in a traditional cooler, will make life easier and more comfortable.

The first stage of purification is provided by a sediment filter that removes sand, rust and other suspensions;

the second stage of purification is provided by a carbon filter that removes free chlorine, odor, organic compounds from the water;

the third stage of purification is provided by a carbon post-filter that eliminates possible foreign taste and improves the taste of water;

the fourth stage of purification occurs with the help of an ultrafiltration membrane that removes bacteria, viruses and ultrafine particles of contaminants.

Filters are included in the device.

3. Modern ergonomics and design of the purifier.

The purifier has an optimal height of 1.4 m, which is convenient both for visual overview of the control elements and for contact with them.

The front panel is made of tempered glass, which emphasizes the premiumness of the model. In addition, such a panel is convenient in everyday care for it.

In this model of the purifier, mechanical buttons have gone into the past. The purifier is controlled by touch (electronic) buttons. The process of performing a certain function is displayed on the electronic display of the purifier.

The purifier has a child protection function for activating the function of filling (draining) hot water. It is worth noting the modern implementation of this option, not just through a mechanical lock, but by means of a programmed delay of pressing for 3 seconds on the button to unlock the hot water supply.

Since the filters in the purifier require periodic replacement, for visual control of the terms of their replacement, the filter resource indicator is displayed on the display.

4. Protection against leaks.

The purifier is equipped with leak protection.

The sensor (board) for detecting water leakage is placed on the bottom of the purifier body.

If a leak occurs and the sensor electrodes are flooded with water for 10 seconds, a signal is sent to the main control board, causing the solenoid valve to operate, cutting off the water supply to the system. Flashing indicators of the leak alarm will start to notify about the triggered protection.

5. Distance of the purifier from the connection point.

The use of the purifier implies connection to the water supply. Usually the distance of the purifier from the connection point to the water supply (without loss of performance) can reach 100 meters. But this distance can also be increased. In this case, you need to take into account the water pressure in the water supply and install a pump to increase the pressure at low pressure.

6. Water filling speed.

0.5 liters of water - within 14 seconds.